Back to Sectors

Construction Safety Management

Construction safety software built for the jobsite. SiteChief helps general contractors, subcontractors, superintendents, and safety directors run JHAs, competent person inspections, permits, toolbox talks, and OSHA recordkeeping under 29 CFR 1926, from the first day of excavation to final closeout.

Why SiteChief for Construction?

  • OSHA construction compliance organized around 29 CFR 1926, with JHAs and inspections that reference the standard that applies to the task
  • Digital permits to work for hot work, confined space entry, excavation, and electrical lockout
  • Subcontractor oversight: review each sub's JHAs before they mobilize and keep their training records on file for prequalification
  • Competent person inspections for trenches (Subpart P) and scaffolds (Subpart L), done on a phone before the shift starts, with photos

Key Benefits for Construction

Sector-specific safety management tailored to your operational needs

OSHA construction compliance organized around 29 CFR 1926, with JHAs and inspections that reference the standard that applies to the task

Digital permits to work for hot work, confined space entry, excavation, and electrical lockout

Subcontractor oversight: review each sub's JHAs before they mobilize and keep their training records on file for prequalification

Competent person inspections for trenches (Subpart P) and scaffolds (Subpart L), done on a phone before the shift starts, with photos

Fall protection checks under Subpart M: guardrails, hole covers, anchor points, and personal fall arrest gear at 6 feet and above

Focus Four tracking, so falls, struck-by, caught-in/between, and electrocution hazards show up in your leading indicators and not only in your injury log

Toolbox talks with digital sign-off and attendance records for every crew

Multi-project dashboard that shows a GC open corrective actions, inspections, and incident rates across every active jobsite

How It Works

From setup to full compliance in four simple steps

1

Project Setup & Orientation

Set up the project, name the competent persons for excavation, scaffolds, and fall protection, and record site orientations. Each sub's training records are on file before their crew walks through the gate.

2

JHAs & Permits

Build a Job Hazard Analysis for each task, or have the AI assistant draft one for your review. Issue digital permits for hot work, confined space entry, and excavation. Every JHA cites the 1926 standard it's written against.

3

Daily Jobsite Operations

Run trench and scaffold inspections, toolbox talks, and near-miss reports from the mobile app, even without a signal. Corrective actions get an owner and a due date, and the dashboard shows what's still open by trade.

4

Recordkeeping & Closeout

Keep the OSHA 300 log, Form 301 incident records, and the 300A annual summary in one place. When an owner's prequalification form asks for your incident rates and the injury history behind your EMR, or an OSHA inspector asks for documentation, it's already there.

Visual Overview

See how SiteChief fits into construction operations

Construction Site Safety HierarchyELIMINATEPlan out hazards (pre-construction)REDUCEEngineering controls & safe systems of workCONTROLPermits, training, supervisionPPELast line of defenceMostEffectiveLeastEffectiveOSHA 1926CompliantTracked Items✓ Permits: Live⚠ RAMS: 3 due✓ Inductions: 98%

OSHA Compliance & Standards

Built to meet the specific regulatory requirements for construction

29 CFR 1926 — Safety and Health Regulations for Construction

29 CFR 1926 Subpart M — Fall Protection

29 CFR 1926 Subpart P — Excavations

29 CFR 1926 Subpart L — Scaffolds

29 CFR 1926.20 and 1926.21 — Accident Prevention, Inspections, and Training

29 CFR 1904 — Recording and Reporting Occupational Injuries and Illnesses

29 CFR 1910.1200 — Hazard Communication (applied to construction by 1926.59)

Key Modules for Construction

The SiteChief modules most relevant to your sector

Risk Assessments & JHAs
Permit to Work
Incident Reporting & OSHA Recordkeeping
Training & Competency Matrix
Site Inspections & Audits
Fire Safety Management

Frequently asked questions

How does SiteChief support the Construction sector?
Construction safety software built for the jobsite. SiteChief helps general contractors, subcontractors, superintendents, and safety directors run JHAs, competent person inspections, permits, toolbox talks, and OSHA recordkeeping under 29 CFR 1926, from the first day of excavation to final closeout.
What are the steps to manage Construction safety with SiteChief?
Project Setup & Orientation: Set up the project, name the competent persons for excavation, scaffolds, and fall protection, and record site orientations. Each sub's training records are on file before their crew walks through the gate. JHAs & Permits: Build a Job Hazard Analysis for each task, or have the AI assistant draft one for your review. Issue digital permits for hot work, confined space entry, and excavation. Every JHA cites the 1926 standard it's written against. Daily Jobsite Operations: Run trench and scaffold inspections, toolbox talks, and near-miss reports from the mobile app, even without a signal. Corrective actions get an owner and a due date, and the dashboard shows what's still open by trade. Recordkeeping & Closeout: Keep the OSHA 300 log, Form 301 incident records, and the 300A annual summary in one place. When an owner's prequalification form asks for your incident rates and the injury history behind your EMR, or an OSHA inspector asks for documentation, it's already there.
What are the main benefits for Construction?
OSHA construction compliance organized around 29 CFR 1926, with JHAs and inspections that reference the standard that applies to the task. Digital permits to work for hot work, confined space entry, excavation, and electrical lockout. Subcontractor oversight: review each sub's JHAs before they mobilize and keep their training records on file for prequalification. Competent person inspections for trenches (Subpart P) and scaffolds (Subpart L), done on a phone before the shift starts, with photos.
Which regulations apply to Construction?
29 CFR 1926 — Safety and Health Regulations for Construction. 29 CFR 1926 Subpart M — Fall Protection. 29 CFR 1926 Subpart P — Excavations. 29 CFR 1926 Subpart L — Scaffolds. 29 CFR 1926.20 and 1926.21 — Accident Prevention, Inspections, and Training. 29 CFR 1904 — Recording and Reporting Occupational Injuries and Illnesses. 29 CFR 1910.1200 — Hazard Communication (applied to construction by 1926.59).

Ready to Join Us?

Start your journey towards simpler, more effective safety management today.

30-day free trial · Cancel anytime

We use cookies. Essential ones are on. Optional ones need your OK.