Back to All Modules
Dashboard & Overview

Corrective Action Tracker

Keeps every corrective action from an audit, inspection or incident open until someone has shown it's done, and chases the owner when it isn't.

What is Corrective Action Tracker?

A corrective action from last year's fire protection inspection is still open eleven months on. Another went to a superintendent who left in March, and nobody picked it up. A third finding, an unguarded belt on the same conveyor, has turned up in three audits in a row, each time with a fresh action against it and nothing to show the guard went on. That's what happens to CAPA when it lives in a spreadsheet nobody owns. The Action Tracker gives it somewhere else to live. Anything raised from an incident, an inspection, an audit or an observation goes into one register with a named owner and a due date, and it stays open until it's properly closed.

Chasing is the part that usually fails. It isn't that people don't care. The reminder depends on whoever raised the action remembering to ask, and they've got their own job to do. Here the system does the asking. The owner gets a reminder before the due date, and if the date passes, their manager hears about it too. Closing an action isn't a checkbox either. The owner has to upload something, say a photo of the repaired guardrail or the revised JHA, and a second person confirms the control is in place before the action closes. An action marked complete with no evidence doesn't get through.

The reporting is plain, but it earns its keep. Filter by site, department or owner and you can see where things are stuck and who's sitting on what. When an auditor or an OSHA compliance officer asks how you know the fix was made, you have the evidence and the verification record instead of a promise. It's the same habit 29 CFR 1903.19 asks for after a citation, where you certify abatement and, for the more serious items, send documents that prove it. Dated close-out evidence also helps when a condition you fixed once is the one you least want cited again as a repeat. And it's the loop OSHA's Recommended Practices describe under hazard prevention and control, and that ISO 45001 expects you to close under clause 10.2: pick the control, put it in, then confirm it worked.

Regulatory Compliance

  • • OSHA Recommended Practices for Safety and Health Programs - Hazard Prevention and Control
  • • 29 CFR 1903.19 - Abatement verification
  • • ISO 45001:2018 Clause 10.2 - Incident, nonconformity and corrective action
  • • ANSI/ASSP Z10.0-2019 - Corrective and preventive action
Corrective Action Tracker Workflow1
An action is raised automatically when an incident, inspection, audit or near mi...
2
It's assigned to a named person with a priority and a due date
3
The owner gets reminders as the date approaches, and their manager hears about i...
4
The owner uploads evidence and submits the action for review
5
A verifier checks the control is in place before the action is closed

Key Benefits

Every corrective and preventive action raised in the system sits in one register with an owner and a due date

Fewer overdue actions, because the reminder doesn't rely on anyone remembering to send it

A named owner on every action, so if they leave, their open items are visible and can be reassigned in bulk

Close-out needs evidence and a second set of eyes, so done means done

The same finding turning up across jobsites or audits is visible as a repeat, not buried in separate reports

Owners can update an action from their phone while they're still on the floor or the jobsite

Features & Capabilities

One action register, with each action linked back to the incident, inspection, audit or observation it came from

Assignment to a named owner with email notification

Escalation rules that notify the owner's manager when an action goes overdue

Evidence upload required before an action can be submitted for verification

Bulk edit and reassignment, useful when someone leaves or a site changes hands

Filter by status, priority, site, category or owner

How It Works

1

An action is raised automatically when an incident, inspection, audit or near miss is logged

2

It's assigned to a named person with a priority and a due date

3

The owner gets reminders as the date approaches, and their manager hears about it if it slips

4

The owner uploads evidence and submits the action for review

5

A verifier checks the control is in place before the action is closed

Frequently asked questions

What is Corrective Action Tracker?
Keeps every corrective action from an audit, inspection or incident open until someone has shown it's done, and chases the owner when it isn't.
How does Corrective Action Tracker work?
An action is raised automatically when an incident, inspection, audit or near miss is logged. It's assigned to a named person with a priority and a due date. The owner gets reminders as the date approaches, and their manager hears about it if it slips. The owner uploads evidence and submits the action for review. A verifier checks the control is in place before the action is closed.
What are the main benefits of Corrective Action Tracker?
Every corrective and preventive action raised in the system sits in one register with an owner and a due date. Fewer overdue actions, because the reminder doesn't rely on anyone remembering to send it. A named owner on every action, so if they leave, their open items are visible and can be reassigned in bulk. Close-out needs evidence and a second set of eyes, so done means done.
Which regulations does Corrective Action Tracker help you comply with?
OSHA Recommended Practices for Safety and Health Programs - Hazard Prevention and Control. 29 CFR 1903.19 - Abatement verification. ISO 45001:2018 Clause 10.2 - Incident, nonconformity and corrective action. ANSI/ASSP Z10.0-2019 - Corrective and preventive action.

Ready to Use Corrective Action Tracker?

Start managing your health and safety with our comprehensive solution.

30-day free trial · Cancel anytime

We use cookies. Essential ones are on. Optional ones need your OK.