What is Permit to Work?
A permit is the last check before somebody strikes an arc, breaks a line or climbs into a tank. On paper, that check gets weak fast. The handwriting can't be read, the signature block is blank, and the copy that was supposed to be posted at the job is sitting in a pickup. SiteChief's permit to work software puts every permit in one place, so you know what's open, where it is, and who signed for it.
Each permit walks the requester through the pre-work checks: the hazard assessment or JHA for the task, energy isolation under your lockout/tagout program (29 CFR 1910.147), and the emergency arrangements. Approval runs in stages that you configure, so a hot work permit under 1910.252 or a permit-required confined space entry under 1910.146 doesn't start until everyone who has to sign has signed. Every signature carries a timestamp and a location, which is what you'll want in hand when an OSHA compliance officer asks to see the permit.
The permit board shows every active permit by location. That's how you catch the welder scheduled above a crew that's opening a solvent line, or an excavation crew working next to an energized electrical job covered by an NFPA 70E permit. Permits expire on their own at the end of the time you set, so a one-shift permit doesn't quietly carry into the next shift. When conditions change, you can suspend or cancel a permit on the spot.
Regulatory Compliance
- • 29 CFR 1910.147 - The control of hazardous energy (lockout/tagout)
- • 29 CFR 1910.252 - Welding, cutting and brazing (hot work)
- • 29 CFR 1910.146 - Permit-required confined spaces; 29 CFR 1926 Subpart AA for construction
- • 29 CFR 1926 Subpart P - Excavations
- • NFPA 70E - Energized electrical work permit
- • ISO 45001:2018 Clause 8.1 - Operational planning and control
Key Benefits
No more lost permits: every permit is tracked and stored digitally
See all open permits by location and catch conflicting work before it starts
One-tap approvals cut permit processing time by 70%
Electronic signatures with time and location give you a defensible audit trail
Automatic expiration stops work from running past the permit's valid period
Supervisors authorize permits from the field on a phone, not from the trailer
Features & Capabilities
Digital permit forms with pre-work checklists that must be completed before submission
Multi-stage approval workflows with configurable authorization levels
Electronic signatures with timestamp and geolocation
Permit board showing active permits by location
Automatic expiration with time-limited validity periods
Permit suspension and cancellation workflows
Links to the risk assessment and Job Hazard Analysis (JHA) for the task
Permit close-out process with verification that the work is complete
How It Works
Request a permit from the mobile app or the web with the job details
Complete the pre-work checks, including energy isolation and a review of the JHA
Submit the permit for approval through the multi-stage authorization workflow
Receive electronic authorization and start work
Close out the permit when the job is done, with verification
Frequently asked questions
- What is Permit to Work?
- A digital work permit system for high-hazard jobs: hot work, confined space entry, lockout/tagout, excavation and energized electrical work. Approve from a phone, see every open permit by location, and sign off electronically.
- How does Permit to Work work?
- Request a permit from the mobile app or the web with the job details. Complete the pre-work checks, including energy isolation and a review of the JHA. Submit the permit for approval through the multi-stage authorization workflow. Receive electronic authorization and start work. Close out the permit when the job is done, with verification.
- What are the main benefits of Permit to Work?
- No more lost permits: every permit is tracked and stored digitally. See all open permits by location and catch conflicting work before it starts. One-tap approvals cut permit processing time by 70%. Electronic signatures with time and location give you a defensible audit trail.
- Which regulations does Permit to Work help you comply with?
- 29 CFR 1910.147 - The control of hazardous energy (lockout/tagout). 29 CFR 1910.252 - Welding, cutting and brazing (hot work). 29 CFR 1910.146 - Permit-required confined spaces; 29 CFR 1926 Subpart AA for construction. 29 CFR 1926 Subpart P - Excavations. NFPA 70E - Energized electrical work permit. ISO 45001:2018 Clause 8.1 - Operational planning and control.
Related Modules in Permits to Work
Hot Work Permit
Hot work permits for welding, cutting, brazing, and grinding, with the 35-foot check, fire watch sign-off, and post-work monitoring recorded on a phone.
Confined Space Permit
Entry permits for permit-required confined spaces, with atmospheric test readings, named entry supervisor, attendant and entrants, and rescue arrangements confirmed before anyone goes in.
Industry sectors that use this module
From the blog
22 Oct 2026
Paper vs Digital Permit to Work: Which Is Safer for Contractors?
Compare paper permits with digital permit to work software and see how digital workflows can improve contractor safety, tracking and compliance.
22 Oct 2026
Permit to Work Failures: What Goes Wrong and How to Prevent It
Explore common permit to work failures, from poor communication to missing risk checks, and learn how stronger controls support safer work.
22 Oct 2026
Permit to Work Roles Explained: Issuer, Receiver, and Authoriser
Understand issuer, receiver and authoriser duties in a permit to work system to improve control, communication and workplace safety.