Back to All Modules
Fire Safety

Fire Safety Inspection Software and App

Fire safety inspections built around OSHA 1910 Subpart E and 1910.157: extinguisher checks, exit routes, fire prevention plans, and tracked corrective actions.

What is Fire Safety Inspections?

Most fire safety findings aren't exotic. It's a pallet parked in front of an exit door, an extinguisher with a tag nobody has initialed since spring, a fire prevention plan that still names a supervisor who left two years ago. This module gives you one place to run the routine checks OSHA expects: the fire prevention plan under 29 CFR 1910.39, the emergency action plan under 1910.38, exit routes under 1910.36 and 1910.37, and portable extinguishers under 1910.157.

Inspectors walk the floor with a phone. Checklists cover ignition sources, storage of flammable and combustible materials, housekeeping, exit route width and marking, emergency lighting, alarms, and extinguisher condition and placement. They take a photo of what they find and rate it. Anything that fails becomes a corrective action with an owner and a due date, so the blocked exit on the loading dock doesn't sit in a notebook until the fire marshal finds it.

Extinguishers get their own schedule: the monthly visual inspection and the annual maintenance check required by 1910.157(e), with the dates recorded against each unit. When the fire marshal, your insurer's loss control rep, or an OSHA compliance officer asks for records, you can pull the inspection history, the open and closed actions, and the current plans without digging through binders.

Regulatory Compliance

  • • 29 CFR 1910.39 - Fire Prevention Plans
  • • 29 CFR 1910.38 - Emergency Action Plans
  • • 29 CFR 1910.157 - Portable Fire Extinguishers
  • • 29 CFR 1910.36 and 1910.37 - Exit Routes
  • • NFPA 101 - Life Safety Code
  • • NFPA 10 - Standard for Portable Fire Extinguishers
Fire Safety Inspections Workflow1
Set up each building or jobsite with its occupancy type and inspection schedule
2
Walk the site and check ignition sources, storage, and housekeeping
3
Inspect exit routes, signage, alarms, and emergency lighting
4
Record the condition of each extinguisher and other fire protection equipment
5
Assign corrective actions by priority and track them to close-out

Key Benefits

Keep fire prevention and emergency action plans current under 29 CFR 1910.39 and 1910.38

Monthly and annual extinguisher inspections documented to 1910.157(e) and NFPA 10

Blocked exits and missing signage get caught on your walk, not the fire marshal's

Dated inspection records ready for the AHJ, your insurer, or an OSHA inspector

Every deficiency has an owner, a due date, and evidence of close-out

One inspection history across every building, shift, and jobsite

Features & Capabilities

Fire safety inspection checklists completed on iOS or Android, with photos

Ignition source and flammable or combustible material checks

Exit route checks: clear width, unlocked doors, signage, and lighting (1910.36/37)

Portable extinguisher records with monthly visual and annual maintenance dates

Alarm, emergency lighting, and sprinkler condition checks

Fire prevention plan and emergency action plan review tracking

Fire risk assessments with rated hazards and controls

Corrective actions ranked by priority, with owners, due dates, and escalation

How It Works

1

Set up each building or jobsite with its occupancy type and inspection schedule

2

Walk the site and check ignition sources, storage, and housekeeping

3

Inspect exit routes, signage, alarms, and emergency lighting

4

Record the condition of each extinguisher and other fire protection equipment

5

Assign corrective actions by priority and track them to close-out

Frequently asked questions

What is Fire Safety Inspections?
Fire safety inspections built around OSHA 1910 Subpart E and 1910.157: extinguisher checks, exit routes, fire prevention plans, and tracked corrective actions.
How does Fire Safety Inspections work?
Set up each building or jobsite with its occupancy type and inspection schedule. Walk the site and check ignition sources, storage, and housekeeping. Inspect exit routes, signage, alarms, and emergency lighting. Record the condition of each extinguisher and other fire protection equipment. Assign corrective actions by priority and track them to close-out.
What are the main benefits of Fire Safety Inspections?
Keep fire prevention and emergency action plans current under 29 CFR 1910.39 and 1910.38. Monthly and annual extinguisher inspections documented to 1910.157(e) and NFPA 10. Blocked exits and missing signage get caught on your walk, not the fire marshal's. Dated inspection records ready for the AHJ, your insurer, or an OSHA inspector.
Which regulations does Fire Safety Inspections help you comply with?
29 CFR 1910.39 - Fire Prevention Plans. 29 CFR 1910.38 - Emergency Action Plans. 29 CFR 1910.157 - Portable Fire Extinguishers. 29 CFR 1910.36 and 1910.37 - Exit Routes. NFPA 101 - Life Safety Code. NFPA 10 - Standard for Portable Fire Extinguishers.

Ready to Use Fire Safety Inspections?

Start managing your health and safety with our comprehensive solution.

30-day free trial · Cancel anytime

We use cookies. Essential ones are on. Optional ones need your OK.