What is Risk Assessment & JHA?
A JHA written in 2019 by someone who has since left, a review date on the cover sheet crossed out twice, and temp workers who showed up Monday and have never seen it. Plenty of jobsites have the binder. This module is for turning it into a document the crew works from. It follows the method in OSHA's Job Hazard Analysis guidance (OSHA 3071): break the job into steps, identify the hazards at each step, and decide how each one gets controlled. No single OSHA standard requires a JHA for every task. But the General Duty Clause expects you to deal with recognized hazards, 29 CFR 1910.132(d) requires a certified hazard assessment before you select PPE, and a JHA that's current is the plainest way to show you did the thinking before the work started.
Hazard identification tends to get rushed. An AI assistant drafts the JHA for the task, with the hazards you'd expect and the 29 CFR 1910 or 1926 standards that apply, and then hands it to you for review. Treat the draft as a check against the hazards you forgot. Walking the job is still where the assessment gets made, and a competent person still signs off on it. Scoring uses a 5×5 likelihood and severity matrix, so two assessors at two plants arrive at comparable numbers. When you get to additional controls it nudges you up the hierarchy. Eliminate or substitute first. Engineering controls next. Procedures and PPE come last, because a control that only exists on a laminated sheet in the job trailer isn't a control.
Templates cover the repeat work: the trench that gets dug every week, the dock where forklifts and foot traffic share an aisle. A blank JHA covers the job that wasn't on the schedule this morning. Both sit on a review schedule, and the schedule is tied to things that happen in practice: an incident or near miss, a change to the process, the equipment or the people doing the work, or a set interval passing. OSHA's guidance says to revisit a JHA on those same triggers. Here the review is built into the schedule and reminded ahead of time, so it gets done long before an auditor, an insurer or an OSHA inspector at the gate asks to see it.
Regulatory Compliance
- • OSH Act of 1970 Section 5(a)(1) - General Duty Clause
- • OSHA 3071 - Job Hazard Analysis guidance
- • 29 CFR 1910.132(d) - Hazard assessment and PPE selection (general industry)
- • 29 CFR 1926.20 and 1926.21 - Accident prevention, inspections and hazard training (construction)
- • ISO 45001:2018 Clause 6.1.2 - Hazard identification and risk assessment
Key Benefits
Fewer injuries from the hazards everyone knew about and nobody wrote down
JHAs take less time to write, so they get written before the job starts
Documented evidence of what you assessed, when, and what you did about it
A record you can hand to an OSHA compliance officer, a general contractor or an insurer when they ask for one
The same hazard is scored on the same scale at every location, so the numbers are comparable
Assessments revisited after an incident, a change or an audit, before they quietly go out of date
Features & Capabilities
Guided workflow for risk assessments and JHAs, so nothing gets skipped
AI assistant that drafts a JHA for the task, for you to review, edit and approve
OSHA 29 CFR 1910 and 1926 standard references alongside the hazards they cover
5×5 likelihood and severity matrix with residual risk worked out automatically
Hierarchy of controls built into the additional-controls step: elimination, substitution, engineering, administrative, PPE
Templates for repeat tasks and blank assessments for the one-off job
Review dates set by risk rating, with reminders before they lapse
Photos and documents attached to the assessment itself
Actions raised for every control that's been identified but isn't yet in place
How It Works
Pick the job or location, starting from a template, an AI-drafted JHA or a blank sheet
Work through the hazards, using the draft as a check against what you've already seen on the floor or the jobsite
Record the controls already in place and score the initial risk on the 5×5 matrix
Add further controls, working down from elimination before you reach for PPE
Score the residual risk and set the review date, driven by the rating and any review period your own safety program sets
Frequently asked questions
- What is Risk Assessment & JHA?
- Risk assessments and Job Hazard Analyses (JHAs) with OSHA standard references, scored on a 5×5 matrix, with controls tracked and reviews that get done.
- How does Risk Assessment & JHA work?
- Pick the job or location, starting from a template, an AI-drafted JHA or a blank sheet. Work through the hazards, using the draft as a check against what you've already seen on the floor or the jobsite. Record the controls already in place and score the initial risk on the 5×5 matrix. Add further controls, working down from elimination before you reach for PPE. Score the residual risk and set the review date, driven by the rating and any review period your own safety program sets.
- What are the main benefits of Risk Assessment & JHA?
- Fewer injuries from the hazards everyone knew about and nobody wrote down. JHAs take less time to write, so they get written before the job starts. Documented evidence of what you assessed, when, and what you did about it. A record you can hand to an OSHA compliance officer, a general contractor or an insurer when they ask for one.
- Which regulations does Risk Assessment & JHA help you comply with?
- OSH Act of 1970 Section 5(a)(1) - General Duty Clause. OSHA 3071 - Job Hazard Analysis guidance. 29 CFR 1910.132(d) - Hazard assessment and PPE selection (general industry). 29 CFR 1926.20 and 1926.21 - Accident prevention, inspections and hazard training (construction). ISO 45001:2018 Clause 6.1.2 - Hazard identification and risk assessment.
Industry sectors that use this module
From the blog
12 Jul 2026
BS standards explained: a guide for safety professionals
Discover BS standards explained in our guide for safety professionals. Learn how these specifications shape audits, risk assessments, and compliance.
15 Jun 2026
The role of AI in risk assessment: 2026 guide
Discover the role of AI in risk assessment, revolutionizing workplace safety with accurate data analysis and continuous monitoring. Learn more!
6 Jun 2026
The role of automation in risk assessments: 2026 guide
Discover the vital role of automation in risk assessments. Learn how AI and RPA enhance efficiency, accuracy, and speed in risk management.