What is Safety Inspections?
Jobsite inspections are how you find the missing guardrail or the blocked exit before someone gets hurt. On construction work, 29 CFR 1926.20(b)(2) requires frequent and regular inspections of jobsites, materials, and equipment by competent persons, and OSHA's Recommended Practices for Safety and Health Programs treat inspections as a core part of hazard identification in any industry. Paper makes that harder than it should be. Forms sit in a truck, handwriting varies, and nobody can tell you which finding from three weeks ago is still open. This module puts the whole cycle on a phone, from scheduling the walk to closing the last corrective action.
Start from a template library that covers the common walks: general jobsite and facility inspections, fire safety checks, housekeeping audits, and equipment inspections. When your program needs something specific, such as a daily trench inspection or a pre-shift forklift check, the checklist builder lets you write your own, with conditional logic so inspectors only see the questions that apply.
Inspections work offline, so a basement, a remote laydown yard, or the far end of a plant with no signal isn't a problem. Everything syncs when the connection comes back. Photos, voice notes, and barcode scanning cut down the typing, and every deficiency becomes a corrective action with an owner and a due date, so findings don't die in a filing cabinet.
Regulatory Compliance
- • 29 CFR 1926.20(b)(2) - Frequent and regular jobsite inspections by competent persons
- • 29 CFR 1910.22(d)(1) - Inspection of walking-working surfaces
- • OSH Act of 1970 Section 5(a)(1) - General Duty Clause
- • OSHA Recommended Practices for Safety and Health Programs - Hazard Identification and Assessment
- • ISO 45001:2018 Clause 9.1.2 - Evaluation of compliance
Key Benefits
Complete inspections 3× faster than on paper
95% increase in photo evidence captured on mobile devices
Every deficiency becomes a corrective action with an owner and a due date
Trend analysis shows the repeat findings that need a fix at the program level
Offline mobile checklists work anywhere on the jobsite
Standardized checklists keep inspections consistent from one inspector and site to the next
Features & Capabilities
Template library covering common inspection types
Custom checklist builder with conditional logic
Offline capability with automatic sync
Photo evidence with automatic timestamp and geolocation
Barcode and QR code scanning to identify equipment
Scoring and pass/fail results with trend analysis
Automatic corrective actions for deficiencies and observations
Scheduled inspections with reminder notifications
How It Works
Schedule the inspection and assign an inspector and a due date
The inspector completes the checklist on a phone or tablet, adding photos as they go
The system creates a corrective action for each deficiency found
Scoring and trend analysis point to the highest-risk areas
Follow-up inspections verify that corrective actions were completed
Frequently asked questions
- What is Safety Inspections?
- Safety inspection software with offline-ready mobile checklists, photo evidence, scoring, and corrective actions generated for every deficiency.
- How does Safety Inspections work?
- Schedule the inspection and assign an inspector and a due date. The inspector completes the checklist on a phone or tablet, adding photos as they go. The system creates a corrective action for each deficiency found. Scoring and trend analysis point to the highest-risk areas. Follow-up inspections verify that corrective actions were completed.
- What are the main benefits of Safety Inspections?
- Complete inspections 3× faster than on paper. 95% increase in photo evidence captured on mobile devices. Every deficiency becomes a corrective action with an owner and a due date. Trend analysis shows the repeat findings that need a fix at the program level.
- Which regulations does Safety Inspections help you comply with?
- 29 CFR 1926.20(b)(2) - Frequent and regular jobsite inspections by competent persons. 29 CFR 1910.22(d)(1) - Inspection of walking-working surfaces. OSH Act of 1970 Section 5(a)(1) - General Duty Clause. OSHA Recommended Practices for Safety and Health Programs - Hazard Identification and Assessment. ISO 45001:2018 Clause 9.1.2 - Evaluation of compliance.
Related Modules in Inspections & Audits
Safety Audits
Safety audit software for EHS program audits: ISO 45001 and ANSI/ASSP Z10 protocols, classified findings, and corrective actions tracked through to verified close-out.
Scaffolding Inspection
TG20 compliant scaffolding inspection records with handover certificates, tagging systems, and 7-day inspection scheduling.
Crane & Lifting Equipment Inspections
Frequent, periodic and annual inspections for cranes, hoists, slings and rigging, scheduled by equipment type with inspector qualifications and operator certifications on file.
Industry sectors that use this module
From the blog
27 Apr 2026
Safety inspections step by step: your essential guide
Master safety inspections step by step with our essential guide—boost compliance, enhance safety, and prevent injuries.
22 Oct 2026
Accident, Near Miss or Dangerous Occurrence? How to Classify Workplace Events
Learn how to classify workplace events and strengthen incident reporting with clear definitions for accidents, near misses and dangerous occurrences.
22 Oct 2026
Incident Reporting Metrics: Which Safety KPIs Are Worth Tracking?
Discover which safety KPIs matter, from near misses to incident rates, and how an incident reporting system helps track trends and improve safety.