What is Electrical Equipment Inspections?
A nicked extension cord or a drill with a missing ground pin is how people get shocked on an ordinary Tuesday. This module keeps a register of your cord sets, portable tools, and other cord-and-plug equipment, then tracks every inspection and test against it: what was checked, who checked it, what they found, and what happened to anything that failed.
On construction sites, 29 CFR 1926.404(b)(1) gives you two choices: GFCI protection, or an assured equipment grounding conductor program run by a competent person. If you run the program, you owe continuity and terminal-connection tests before first use, after repairs, after suspected damage, and at intervals of no more than three months, plus a visual check before each day's use. SiteChief schedules those tests by equipment type and environment, so the cords on a wet, muddy jobsite don't sit on the same cycle as a monitor cable in the office trailer.
Tagging shows the crew at a glance whether a cord or tool is current. Record the quarter's color code or print a QR tag, and anything that fails is flagged out of service until it's repaired or scrapped. Because the test history stays with each item, you can see which tools keep coming back damaged, and whether that's a supplier problem or a handling problem.
Regulatory Compliance
- • 29 CFR 1926.404(b)(1) - Ground-fault protection: GFCIs or assured equipment grounding conductor program
- • 29 CFR 1926.403 and 1926.416 - Electrical equipment examination and safe use on construction sites
- • 29 CFR 1910 Subpart S - Electrical, including 1910.334(a) portable cord-and-plug equipment inspection
- • NFPA 70E - Standard for Electrical Safety in the Workplace
Key Benefits
Catch damaged cords, missing ground pins, and cracked housings before someone gets shocked
Keep the test records an assured equipment grounding conductor program requires, ready when OSHA asks
Set test intervals by equipment type and environment so effort goes where the risk is
Color-code or QR tags show the crew whether a tool is current
Failed equipment is flagged out of service so it doesn't drift back onto the job
Test history shows repeat failures by tool, crew, or location
Features & Capabilities
Equipment register for cord sets, portable tools, and cord-and-plug equipment, with type and risk classification
Test intervals set by risk and environment, including the three-month maximum for assured grounding tests
Test scheduling with assignment to a competent person or electrician
Mobile entry of inspection and test results with photo evidence
Pass/fail tagging with quarterly color codes and QR code generation
Failed equipment workflow that takes the item out of service until repair or disposal
Test history by item for trend analysis
Contractor management for outsourced electrical testing
How It Works
Register cord sets, portable tools, and cord-and-plug equipment with a risk classification
Set inspection and test intervals by equipment type and environment
Schedule tests with your competent person, in-house electricians, or an outside contractor
Run the inspection and record results from a phone or tablet
Tag what passes with the current color code and pull what fails out of service
Frequently asked questions
- What is Electrical Equipment Inspections?
- Inspection and testing records for cord-and-plug equipment, extension cords, and power tools, with scheduled tests, color-code tagging, and a clear trail for your assured grounding program.
- How does Electrical Equipment Inspections work?
- Register cord sets, portable tools, and cord-and-plug equipment with a risk classification. Set inspection and test intervals by equipment type and environment. Schedule tests with your competent person, in-house electricians, or an outside contractor. Run the inspection and record results from a phone or tablet. Tag what passes with the current color code and pull what fails out of service.
- What are the main benefits of Electrical Equipment Inspections?
- Catch damaged cords, missing ground pins, and cracked housings before someone gets shocked. Keep the test records an assured equipment grounding conductor program requires, ready when OSHA asks. Set test intervals by equipment type and environment so effort goes where the risk is. Color-code or QR tags show the crew whether a tool is current.
- Which regulations does Electrical Equipment Inspections help you comply with?
- 29 CFR 1926.404(b)(1) - Ground-fault protection: GFCIs or assured equipment grounding conductor program. 29 CFR 1926.403 and 1926.416 - Electrical equipment examination and safe use on construction sites. 29 CFR 1910 Subpart S - Electrical, including 1910.334(a) portable cord-and-plug equipment inspection. NFPA 70E - Standard for Electrical Safety in the Workplace.
Related Modules in Assets & Equipment
Industry sectors that use this module
From the blog
22 Oct 2026
Accident, Near Miss or Dangerous Occurrence? How to Classify Workplace Events
Learn how to classify workplace events and strengthen incident reporting with clear definitions for accidents, near misses and dangerous occurrences.
22 Oct 2026
Incident Reporting Metrics: Which Safety KPIs Are Worth Tracking?
Discover which safety KPIs matter, from near misses to incident rates, and how an incident reporting system helps track trends and improve safety.
22 Oct 2026
Paper vs Digital Permit to Work: Which Is Safer for Contractors?
Compare paper permits with digital permit to work software and see how digital workflows can improve contractor safety, tracking and compliance.