Back to All Modules
Incident Management

Accident Investigation

Evidence capture, witness statements, root cause analysis and corrective actions tracked to closure, built for the days after someone gets hurt.

What is Accident Investigation?

29 CFR 1904 tells you what to record and what to report. It doesn't tell you how to find out why it happened, and that's where an incident investigation goes wrong. The report says the employee didn't follow the JHA, everyone sits through a toolbox talk, and the file gets closed. Six months later the same thing happens on a different jobsite. OSHA's guidance on incident investigations is blunt about this: stopping at "worker error" or "failure to follow procedure" fixes nothing, because it never asks why the procedure wasn't followed. The module uses a timeline of events, 5 Whys and fishbone analysis to do that work, so you get past the individual and into the planning, training and supervision behind the event.

Evidence goes quickly. The scene gets cleaned up because production has to restart, the camera system overwrites itself after two weeks, and the statement you finally take three weeks later is a tidier story than the one you'd have heard that afternoon on the dock. Photos, statements, video and documents are captured and stored here with a chain of custody record showing who added what and when. If the case ends up in front of an OSHA compliance officer, a workers' comp carrier or an attorney two years on, you can show where every item came from, who added it, and whether anyone has changed it since.

The report is built from what you've recorded, so the account and the evidence line up and nothing gets retyped at eleven at night. Corrective actions are where the good intentions run out. They get written into the report, nobody's name goes against them, and they're still open at the next audit. Here every action has an owner and a due date, and it isn't closed until someone has checked that it was done and that it worked. An inspector or an insurer reading that record can see the action was completed and verified, with a date against each step.

Regulatory Compliance

  • • OSH Act of 1970 Section 5(a)(1) - General Duty Clause
  • • 29 CFR 1904 - Recording and reporting occupational injuries and illnesses
  • • 29 CFR 1910.119(m) - Process safety management incident investigation
  • • OSHA Recommended Practices for Safety and Health Programs - Hazard identification and assessment
  • • ANSI/ASSP Z10 - Incident investigation
  • • ISO 45001:2018 Clause 10.2 - Incident investigation
Accident Investigation
1
Assign the investigator as soon as the incident is reported,...
2
Capture photos, statements and documents the same day, each ...
3
Work the timeline and root cause analysis from the immediate...
4
Produce the investigation report from what you've recorded

Key Benefits

Less time retyping and more time finding out why it happened

Investigations that get past 'employee error' to the decisions behind it

A chain of custody you can stand behind if it ends up in litigation

Corrective actions with an owner, a due date and a check that they worked

Records that show OSHA and your insurance carrier what you actually did

The same standard of investigation whether it's your first or your fiftieth

Features & Capabilities

Investigation templates that follow OSHA's incident investigation guidance and its focus on root causes

Root cause analysis tools: timeline, 5 Whys, fishbone and bow-tie

Evidence store with chain of custody for photos, video, statements and documents

Witness statements recorded and signed electronically

Investigation report produced from the recorded evidence, on your own template

Corrective action register with owners, due dates and verified closure

How It Works

1

Assign the investigator as soon as the incident is reported, before the scene changes

2

Capture photos, statements and documents the same day, each logged to the chain of custody

3

Work the timeline and root cause analysis from the immediate cause down to the program-level causes behind it

4

Produce the investigation report from what you've recorded

5

Assign corrective actions, track them, and close them only once they've been verified

Frequently asked questions

What is Accident Investigation?
Evidence capture, witness statements, root cause analysis and corrective actions tracked to closure, built for the days after someone gets hurt.
How does Accident Investigation work?
Assign the investigator as soon as the incident is reported, before the scene changes. Capture photos, statements and documents the same day, each logged to the chain of custody. Work the timeline and root cause analysis from the immediate cause down to the program-level causes behind it. Produce the investigation report from what you've recorded. Assign corrective actions, track them, and close them only once they've been verified.
What are the main benefits of Accident Investigation?
Less time retyping and more time finding out why it happened. Investigations that get past 'employee error' to the decisions behind it. A chain of custody you can stand behind if it ends up in litigation. Corrective actions with an owner, a due date and a check that they worked.
Which regulations does Accident Investigation help you comply with?
OSH Act of 1970 Section 5(a)(1) - General Duty Clause. 29 CFR 1904 - Recording and reporting occupational injuries and illnesses. 29 CFR 1910.119(m) - Process safety management incident investigation. OSHA Recommended Practices for Safety and Health Programs - Hazard identification and assessment. ANSI/ASSP Z10 - Incident investigation. ISO 45001:2018 Clause 10.2 - Incident investigation.

Ready to Use Accident Investigation?

Start managing your health and safety with our comprehensive solution.

30-day free trial · Cancel anytime

We use cookies. Essential ones are on. Optional ones need your OK.